Windows License Key Not Activated
Windows License Key is not activated on my Simply NUC Unit
Make sure the NUC unit is connected to a stable internet connection and activate the Windows License Key found on the underside of the Product.
Example:
A Windows License Key consists of a 25-character code used for activation.
License Key : XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
Copy the Windows License Key and enter it with the following steps:
Click Start > Settings > Update & security > Activation > Change the product key.
Enter the new product key then click Next to Activate.
Related Articles
Creating a Restore key
Creating a Restore key Before Starting You will have to take a snapshot of your OS at the point you want to restore it. Right click the Start button Go to settings Click Update and Security On the left look for backup The drive, ensuring it has ...Using your restore key
If you purchased a Restore key from Simply NUC, below is how to utilize it. Please keep in mind that this will erase all the data on the device. Power down the device Plug in the USB Restore key Power on the device and continuously press F10 This ...Expanding A Drive in Windows
Expanding Drive In Windows Before Starting This process is not overly complicated but if you do not understand the instructions please feel free to reach out to us at 512-799-0401 x2 Expanding Drive Right click on the Start button in the bottom right ...Intel NUC Fanless Bios Updating/Settings Verification How to
Fanless NUC Bios Updating/Settings Verification( DNF, PNF, TNF, LLN CY and vPro and non-vPro) Why are fanless NUC BIOS updates so important you may be asking? Our fanless devices require certain BIOS settings to be set up after the BIOS(firmware) ...Dawson Visual Info
Dawson Visual issue This document exists to go over the current information we have for troubleshooting the Dawson video flickering issue. We are looking to gather as much info as possible regarding this. Whenever a support case is worked where we ...